The Truck Mounted Drilling Rig SZJ40 2250CZ is a high capacity truck integrated mobile drilling rig for 3000 4000 m medium deep well operations.
The Truck Mounted Drilling Rig SZJ40 2250CZ is a high capacity truck integrated mobile drilling rig for 3000 4000 m medium deep well operations. Built to API 4F, API 7K and ISO9001 specifications, the complete drilling unit is installed on a heavy duty all terrain truck chassis. It realizes self propelled road travel without disassembly of main components, delivering outstanding mobility for frequent well pad relocation. This rig is widely deployed for medium deep oil gas, tight gas, coal bed methane and geothermal drilling, especially suited for scattered well sites, mountainous areas and oilfield blocks where rapid rig mobilization is required.
Derrick, drawworks, rotary table and core power assemblies are pre installed on high strength off road truck chassis. The rig is self propelled, no separate tractor vehicle required, and meets public road driving requirements for fast cross site transfer.
Large bore built in hydraulic cylinders complete derrick raising and lowering on location. External truck crane is not needed for rig setup, significantly cutting auxiliary equipment cost and well site preparation time.
Main drawworks and rotary table adopt AC variable frequency drive for precise torque speed regulation; auxiliary actions are driven by hydraulic power. Balanced output performance adapts to variable medium deep formation conditions and improves hole making efficiency.
Components are reasonably arranged on truck chassis to keep low gravity center during transit. It adapts to narrow mountain roads and compact well pads while guaranteeing full load drilling structural rigidity.
Wearing parts adopt universal oil field standard specifications. Chassis suspension, braking and lighting comply with highway traffic regulations, facilitating worldwide maintenance and spare part supply.
| Nominal Drilling Depth | 4000 m (114 mm drill pipe) |
|---|---|
| Maximum Static Hook Load | 2250 kN |
| Main Drawworks Rated Power | 800 kW |
| Rotary Table Model | ZP375 |
| Overall Drive Mode | AC VFD Main Drive plus Hydraulic Auxiliary System |
| Derrick Type | Hydraulic Foldable Truck mounted Derrick |
| Working Ambient Temperature | -35 C ~ +55 C |
| Executive Standard | API 4F, API 7K, ISO9001 |
Adding a 4000 m unit to a mixed drilling fleet usually means choosing between a truck that drives itself and a trailer that waits for a tractor — the SZJ40 2250CZ truck mounted drilling rig is the self-propelled end of that argument, chosen whenever the corridor will not take a tractor-and-trailer convoy. The derrick, drawworks and rotary come pre-installed on a heavy off-road chassis: 4000 m nominal depth on 114 mm pipe, a 2250 kN static hook load, an 800 kW main drawworks and a ZP375 rotary table, with AC variable-frequency drive on the main hoist and hydraulic power for the auxiliary functions. It raises its own hydraulic folding derrick with no external crane, and the low, centred layout is what lets it reach the narrow mountain pads a 4000 m rig normally cannot.
Three questions size this truck-mounted unit correctly: whether your pads have grid power or need the optional full-diesel configuration, since AC VFD assumes a reliable site supply; the axle and over-dimension permit on your mountain road corridor, because a self-propelled 2250 kN unit is a heavy road vehicle in its own right; and the mud and solids control spread you plan to tow behind, for which we reserve mounting interfaces on the matched pump, tanks and skid.
Your quotation will scope the delivered package — rig, power, mud and solids control, and the first spare-parts box — so the figure you compare against a towed-trailer alternative is the figure you actually pay. Send the well list and road profile and we will confirm whether self-propelled or towed wins on your mileage.
Optional hydraulic oil heating unit, low temperature resistant sealing groups and cold start auxiliary device for frigid working environments.
Customize truck chassis configuration, braking and lighting systems to satisfy different countries' highway certification standards.
Alternative full diesel driven configuration for well sites without stable grid power supply.
Custom mounting bases and pipelines for matched mud pump, mud tank and solid control skid package.
Support user specified painting color, brand logo marking and project dedicated complete spare parts kit supply.
Tell us your target depth, hook load and drive type; our engineers reply within 24 working hours.
Use the official contact information for model selection, specification discussion, and project inquiry.
Submit Product Inquiry